Warranty: Window Tint
Warranty Terms & Conditions
- Compliant Vehicles –
Your vehicle may be either New & Used, but has to be within 5 years of age from the manufacturing date and be complete with a Clear Coated Paint Finish.
Type of Cover & Conditions
This warrants automotive window films covered by this original agreement against cracking, crazing, peeling, bubbling, delaminating, demetallising, adhesive failure, film fade, colour change, and loss of performance in any measurable way under normal use on interior glass surfaces for as long as the original purchaser owns their car. The cover extends to the original owner only and is not transferable. Claims must be dealt with the Tint Installer Technician/Contractor regarding warranty claims.
Your warranty is limited to the replacement of film and associated labour costs. This warranty does not cover film damaged by scratching, glass failure, glass breakage, leaking glass, film which has been subjected to mistreatment, abuse, improper care, or film to which stickers, suction cups or similar is attached.
This warranty does not cover any consequential loss however caused. All warranties implied by statute which can be excluded are excluded. Keep this warranty information in a safe place. It combined with proof of purchase and current ownership will be required when making a claim.
Although all care is taken, and windows are thoroughly cleaned, even with the most favourable of conditions it is almost impossible to avoid a few specks of dust from getting under the film during installation. A few minor particles are possible and unless they are large and noticeable from viewing 1 meter away then you should not be worried about this as they will not affect the performance or longevity of your film.
Film Care & Maintenance
After-market window tint for your car has many advantages, and maintaining your car’s window tint is actually pretty easy. Know what products and materials are safe to use on your car’s window tint and you’ll keep it looking as good as it did the day it was installed.
It is important not to wind down your windows for at least 48 hours after installation.
It is also important not to clean the glass during the drying period, normally 21 days.
A hazy or milky appearance and moisture bubbles will be evident soon after initial application. Do not be concerned. They will slowly disappear during the curing process. This may take longer in winter.
After curing, a few small particles or points may remain. They are normally visible from the outside and are inherent to a film adhesive system. They will not affect the performance of the film in anyway.
To clean, simply spray film with Ammonia Free Glass Cleaner and wipe off lightly with a soft cloth or rag. Do not use abrasive cloths, brushes, powders or ammonia based window cleaner.
Be cautious when unbuckling your seat belt that it doesn’t hit the window as it retracts, which could leave a scratch. The same holds true for using extra care when loading your vehicle that you don’t allow anything to rub against the tint.
General Conditions –
1. Warranty cover must be applied for within 30 days of the application date.
2. The vehicle must remain at all times registered for road use within Australia.
3. Only vehicles registered as Passenger Vehicles will be warranted. Commercial vehicles of any kind will not be covered.
4. Warranty is only available to the name of the vehicle owner at the time of the instalment and cannot be transferred over.
5. Original Online Application Receipt must be kept for proof of application – in your confirmation email.
Tips & Warnings
Do not stick registration label to tinted glass.
Be mindful of pets scratching on windows.
Clean the inside of the rubber window seal frequently to prevent dust build up which can cause scratching. Normally every 3 months!